Standard products
Bilz - Insulation pads "Insulation pads"
Insulation boards are made from a precisely defined combination of nitrile rubber and cork particles, embedded in a composite of cotton fibres. The physical and mechanical properties of this high-quality composite material fulfil all current requirements for various industrial applications, depending on the type of panel.
- Effective structure-borne sound insulation and vibration damping
- Resistance to ageing:
Virtually unlimited lifetime if the load values are respected. High degree of constant levelling. - Temperature resistance:
-20° C to +80° C - Chemical resistance:
Excellent resistance to most commercially available coolants, lubricants, fuels and detergents. - Vibration damping properties:
Very high level of vibration damping up to 30%.
General information on insulation pads
- Very good damping properties ensure optimal deflection and level consistency both under static and dynamic loading.
- Bilz insulation pads can be cut to size with any circular saw or band saw.
- We are happy to supply special sizes on request.
- The specified maximum load consists of the static and dynamic load of the machine.
- The optimum insulation effect is achieved at about 80-90% of the specified maximum load.
- Selected insulation pads can also be supplied with a profile on one side (description e.g. B4-1).
- The coefficient of friction given refers to a standard industrial levelling compound.
- The cutting tolerance is according to DIN 7715/T5, class P3.
- W: waffle structure for levelling uneven floors (B32W, B30W, B13W)
Description insulation board type B6
Extremely robust insulation board with highest dimensional stability. Intended for very heavy and long bedded machines.
- Variant without profile.
- Very high load capacity while maintaining dimensional stability.
Technical data:
- Load: 50-350 N/cm²
- Height: 15 mm
- Coefficient of friction: 0.6
Description insulating board type B0
Insulating plate with high dimensional stability, specially designed for machines with low inherent rigidity such as machining centres, lathes and grinders, etc.
- Variant without profile.
- Very good dimensional stability.
Technical data:
- Load: 50-200 N/cm²
- Height: 15 mm
- Coefficient of friction: 0.6
Description insulating board type B4
Universal insulating plate for machine tools, plastic machines and printing machines. Very well suited for machines that tend to "wander".
Technical data:
- Load: 30-100 N/cm²
- Height: 15 mm
- Coefficient of friction: 0.8
Description insulating board type B50
Insulating plate for machines with high dynamic forces and only a small contact surface, e.g. presses, punches, shears, etc.
Technical data:
- Load: 50-200 N/cm²
- Height: 25 mm
- Coefficient of friction: 0.8
Description insulating board type B5
Profiled insulating plate to compensate for uneven floors. Specially designed for machines with small contact area and high dynamic forces, e.g. presses, punches, shears, etc.
Technical data:
- Load: 50-160 N/cm²
- Height: 25 mm
- Coefficient of friction: 0.8
Description insulating board type B32
Soft insulating plate without profile with excellent insulation effect, specially designed for machines with low dynamic forces such as medium-sized presses, punches, etc.
Technical data:
- Load: 20-80 N/cm²
- Height: 25 mm
- Coefficient of friction: 0.8
Description insulation board type B32W
Very soft insulation board with profile and very high insulation effect. Suitable for machines with low dynamic forces.
Technical data:
- Load: 35-70 N/cm²
- Height: 25 mm
- Coefficient of friction: 0.8
Description insulating board type B30
Soft insulating board without profile, specially designed for effective insulation when installed on upper floors.
Technical data:
- Load: 20-80 N/cm²
- Height: 18 mm
- Coefficient of friction: 0.8
Description insulation board type B13W
Insulation board for the highest insulation values, can be stacked up to 6 times. Perfectly suited as a plate set for foundation insulation.
Technical data:
- Load: 5-40 N/cm²
- Height: 13 mm
- Coefficient of friction: 0.8
Anti-slip tiles BS1, BS, BN, BR7, B8
Bilz anti-slip plates and spacers, for mechanical levelling and anti-slip protection. Not to be used for vibration isolation.
BR7 can also be supplied with a profile on one side (referred to as BR7-1, for example).
Pad type BS1
- Load: 10-400 N/cm²
- Height: 1 mm
- Coefficient of friction:0.9
Pad type BS
- Load: 10-400 N/cm
- Height: 2 mm
- Coefficient of friction: 0.9
Pad type BN
- Load: 10-300 N/cm²
- Height: 5 mm
- Coefficient of friction: 0.6
Pad type BR7
- Load: 10-160 N/cm²
- Height: 7 mm
- Coefficient of friction: 0.8
Pad type B8
- Load: 5-40 N/cm²
- Height: 8 mm
- Coefficient of friction: 0.8
