BNSH

Series BNSH/BNSHA are round, without/with bolt-on floor attachment.

Application:
Specifically developed for the mounting of injection moulding machines, presses, punches etc. Optimum load distribution due to our proven pressure plate design. Very high horizontal stability over the entire levelling range.
The BNSHA elements with bolt-on floor plate are particularly suitable for all machines that tend to wander. The floor anchor is not used as a safeguard against tipping.

Insulation pad properties:
B50: Good insulating effect when the machine is installed on natural ground. Very well suited for machines with highly dynamic forces.
B32: Very good insulation effect. Specifically developed for mounting on upper floors or insufficiently stable supporting surfaces.
Colour: RAL 7037, dusty grey

*Special mounting

Filtrera tabell Visar 14 av 14 varianter
Kg (Belastning)
Artikelnummer Lagersaldo Typ H (Höjd) D (Diameter) G (Gänga) Kg (Belastning) Nivåjustering
39-12-0022 0 BNSH 120/32 51 133 M16x1.5 960 +18
39-12-0026 0 BNSH 160/32 52 175 M20x1.5 1700 +17
39-12-0042 0 BNSH 70/0* 31 80 M10x1.25 500 +6
39-12-0030 0 BNSH 175/32 56 193 M20x1.5 2080 +17
39-12-0047 0 BNSH 80/50 43 96 M12x1.5 950 +18
39-12-0034 0 BNSH 200/32 63 229 M24x2.0 2900 +16
39-12-0024 0 BNSH 120/50 51 133 M16x1.5 2000 +18
39-12-0038 0 BNSH 250/32 67 270 M30x2.0 4100 +15
39-12-0028 0 BNSH 160/50 52 175 M20x1.5 4000 +17
39-12-0032 0 BNSH 175/50 56 193 M20x1.5 4500 +17
39-12-0036 0 BNSH 200/50 63 229 M24x2.0 6500 +16
39-12-0040 0 BNSH 250/50 67 270 M30x2.0 9000 +15
39-12-0043 0 BNSH 70/30* 34 80 M10x1.25 240 +6
39-12-0045 0 BNSH 80/32 43 96 M12x1.5 480 +18
Hittade inga matchande resultat, ändra ditt urval i filtreringen