BNSHA
Series BNSH/BNSHA are round, without/with bolt-on floor attachment.
Application:
Specifically developed for the mounting of injection moulding machines, presses, punches etc. Optimum load distribution due to our proven pressure plate design. Very high horizontal stability over the entire levelling range.
The BNSHA elements with bolt-on floor plate are particularly suitable for all machines that tend to wander. The floor anchor is not used as a safeguard against tipping.
Insulation pad properties:
B50: Good insulating effect when the machine is installed on natural ground. Very well suited for machines with highly dynamic forces.
B32: Very good insulation effect. Specifically developed for mounting on upper floors or insufficiently stable supporting surfaces.
Colour: RAL 7037, dusty grey
*Special mounting
| Artikelnummer | Lagersaldo | Typ | H (Höjd) | D (Diameter) | G (Gänga) | Kg (Belastning) | Nivåjustering |
|---|---|---|---|---|---|---|---|
| 39-12-0009 | 0 | BNSHA 175/50 | 64 | 193 | M20x1.5 | 4500 | +17 |
| 39-12-0012 | 0 | BNSHA 200/50 | 71 | 229 | M24x2.0 | 6500 | +16 |
| 39-12-0015 | 0 | BNSHA 250/50 | 75 | 270 | M30x2.0 | 9000 | +15 |
| 39-12-0017 | 0 | BNSHA 70/30* | 39 | 80 | M10x1.25 | 240 | +6 |
| 39-12-0018 | 0 | BNSHA 80/32 | 48 | 96 | M12x1.5 | 480 | +18 |
| 39-12-0001 | 0 | BNSHA 120/32 | 56 | 133 | M16x1.5 | 960 | +18 |
| 39-12-0004 | 0 | BNSHA 160/32 | 57 | 175 | M20x1.5 | 1700 | +17 |
| 39-12-0016 | 0 | BNSHA 70/0* | 36 | 80 | M10x1.25 | 500 | +6 |
| 39-12-0007 | 0 | BNSHA 175/32 | 64 | 193 | M20x1.5 | 2080 | +17 |
| 39-12-0020 | 0 | BNSHA 80/50 | 48 | 96 | M12x1.5 | 950 | +18 |
| 39-12-0010 | 0 | BNSHA 200/32 | 71 | 229 | M24x2.0 | 2900 | +16 |
| 39-12-0003 | 0 | BNSHA 120/50 | 56 | 133 | M16x1.5 | 2000 | +18 |
| 39-12-0013 | 0 | BNSHA 250/32 | 75 | 270 | M30x2.0 | 4100 | +15 |
| 39-12-0006 | 0 | BNSHA 160/50 | 57 | 175 | M20x1.5 | 4000 | +17 |